LIBS Info: Element Analysis
| Title | Authors | Material | Detector | Spectrometer | Software |
|---|---|---|---|---|---|
| Quantitative analysis of phosphorus in steel using laser-induced breakdown spectroscopy in air atmosphere | X.Y. Li, X.Y. Zeng, Y.F. Lu, L.B. Guo, Z.Q. Hao, Xin Yan Yang, Zhi Min Zou, Chang Mao Li | Steel | Andor iStar ICCD | IsoPlane SCT 320 | |
| Laser: | Nd:YAG 532.0000nm 60.0000mJ 3.000Hz |
||||
| Gate Delay: | 6.000us | ||||
| Gate Width: | 5.000us | ||||
| Very good study to determine the best conditions for the analysis of P in Pig Iron and low alloy steel - timing and spectrometer resolution are combined for the best results | |||||
| Element | Detection Limit (ppm) | Wavelength (nm) | Other Wavelengths (nm) | Calibration Method | Calibration Range (ppm) | Notes |
|---|---|---|---|---|---|---|
| P | 9.0000 (Calibration Curve Slope) | 214.9100 | N/A | Univariate | 110.0000-3060.0000 | Obtained by careful management of interferences and timing [low alloy steel] |
| P | 12.0000 (Calibration Curve Slope) | 214.9100 | N/A | Univariate | 110.0000-3060.0000 | Obtained by careful management of interferences and timing [Pig Iron] |
| Element | RMSE (ppm) | Wavelength (nm) | Calibration Method | Notes |
|---|